True Fitness 600EA User Manual

Technicians will need at minimum the tools listed below to work on the True Fitness 
equipment covered by these procedures. 
 

 
A multi meter capable of testing voltage, amperage, resistance and continuity. 
 
Outlet tester with a grounding indicator. 
 
Wire stripper, cutter and crimper. 
 
Flashlight 
 
 

 
Screwdrivers: 
#1 Phillips, #2 Phillips, large flat blade, small flat blade, short handled flat blade. 
 
Metric hex-key (Allen wrench) set. 
 
Metric socket set and ratchet with 6mm to 19mm sizes and 21mm and 34mm sizes. 
 
Metric combination wrenches with 4mm to 21mm sizes and a 27mm El crank. 
 
Snap ring pliers, both internal and external. 
 
True Fitness Elliptical  2 19/32 Wrench pn: 90361501 
 
Rubber mallet. 
 
Channel lock pliers or standard pliers with a jaw opening of 2 9/16” for use in removing 
and tightening sleeve nuts. 
 
Needle nose pliers. 
 
Crescent wrench 
 
 

Bicycle crank puller 
Park Tool USA CCP-2