RCA ANT1251F Leaflet

Page of 2
Amplifi ed Indoor Antenna
  
ANT1251F User’s Guide
Welcome!
Thank you for choosing an RCA amplifi ed antenna. RCA amplifi ed antennas are 
designed to give you the sharpest, clearest picture you can get. All RCA antennas 
are easy to set up and use. Before you get started, remove all the parts from the 
box and read this manual.
Finding the best location for the antenna
Before you connect the antenna, determine the best spot in your home for 
optimum reception. Visit www.antennaweb.org to see where your local broadcasts 
are coming from. Then, try as much as possible to avoid obstructions between 
these transmitters and your antenna.
Note: Many times the best location for the antenna is close to a window.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof  of  purchase. Attach it here and 
record the model number in case you need it. These numbers are located on the product.
Model No.:____ANT1251F______________    Purchase Date:___________________________  
Dealer/Address/Phone:_________________
Connecting the antenna to your TV
Once you’ve found the best place for your antenna, connect it to your TV.
Adjusting the antenna for best reception
Different channels may require different antenna adjustments. If  you fi nd that 
you’re not receiving channels you normally receive, try the following adjustments 
in the order listed here:
2. Insert the power adapter into the antenna’s 
DC jack. Plug the other end into a wall 
outlet or power strip.
  Important: This power unit should be plugged in so 
that it stays vertical or lies fl at.
3. Set the amplifi er on/off  switch (on the 
antenna’s back panel) to ON.
•  Extend the antenna’s dipoles (rods) and 
rotate them until you get the best picture. 
(Depending on the channel’s frequency, this 
may or may not have any effect.) 
•  Try the channel without the antenna’s 
amplifi er—set the amplifi er on/off  switch 
on the antenna’s back panel to OFF. (Don’t 
forget to turn the amplifi er back on for 
other channels!)
•  Rotate the base of  the antenna until you 
get the best picture. (Don’t forget to move 
it back to its original position for the other 
channels.)
Note about digital channels
All RCA antennas are designed to receive both analog and digital signals. To 
display digital signals on your TV, you’ll need to have the right equipment: either a 
TV that is capable of  decoding digital signals or a digital converter box.
Troubleshooting
I have a cable ready TV. Why am I not getting any channels above 13?
The tuners inside of  cable ready TVs have two modes. One mode is for cable and 
the other mode is for antenna. When the TV is in cable mode, and you are using 
an antenna, you will not be able to receive any channels above 13. To fi x this, 
simply access the menu of  your TV and switch the TV from Cable/CATV mode 
to ANT/AIR mode.
I have my TV in a metal cabinet. Will the antenna work for me?
Any large metal objects will prevent the antenna signal from reaching the antenna. 
You must place the antenna outside of  or above the metal cabinet.
My home has aluminum siding/insulation. Where should I place my antenna?
Place the antenna near a window to minimize interference and improve your 
reception.
Can I use my antenna in a basement?
TV signals usually cannot penetrate into basement locations due to their lower 
elevation.
Please Note: Other variables, which are not related to antenna performance, can 
effect your reception. These include distance from the source transmitting the 
desired station, and man-made and natural conditions. Example: Obstacles such as 
buildings between the transmitting source and your antenna.
12 Month Limited Warranty
VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of  
this product that should this product or any part thereof, under normal use and conditions, 
be proven defective in material or workmanship within 12 months from the date of  original 
purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge 
for parts and repair labor. To obtain repair or replacement within the terms of  this Warranty, 
the product along with any accessories included in the original packaging is to be delivered with 
proof  of  warranty coverage (e.g. dated bill of  sale), specifi cation of  defect(s), transportation 
prepaid, to the Company at the address shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased, serviced or used 
outside the United States or Canada. The Warranty does not extend to the elimination of  
externally generated static or noise. This Warranty does not apply to costs incurred for 
installation, removal or reinstallation of  the product, or, if  in the Company’s opinion, the 
product has been damaged through acts of  nature, alteration, improper installation, mishandling, 
misuse, neglect, or accident. This Warranty does not cover damage caused by an AC adapter not 
provided with the product. THE EXTENT OF THE COMPANY’S LIABILITY UNDER 
THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED 
ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE 
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of  all other express warranties or liabilities. ANY IMPLIED 
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION 
OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY 
HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT 
WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. 
IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to 
assume for the Company any liability other than expressed herein in connection with the sale of  
this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or 
the exclusion or limitation of  incidental or consequential damage so the above limitations or 
exclusions may not apply to you. This Warranty gives you specifi c legal rights and you may also 
have other rights which vary from state/province to state/province.
U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, 
Mississauga, Ontario L5T 3A5
©2013 VOXX Accessories Corporation 
3502 Woodview Trace, Suite 220, 
Indianapolis, IN 46268
Trademark(s) Registered
www.rcaaudiovideo.com 
All other brands and product names are 
trademarks or registered trademarks of  their 
respective owners.
Product specifi cations are subject to change.
ANT1251F US Insert 02
1. Connect the antenna’s coaxial cable to your 
TV’s antenna input. 
  Note: If  your TV’s antenna input is already 
connected to a satellite receiver, cable box, or digital 
converter, connect the ANT1251F’s coaxial cable to 
the antenna input jack on that device.
Out to TV
DC
DC
Amplifier 
On/Off switch
Dipoles
FCC Statement:
This device complies with part 15 of  the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of  the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if  not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If  this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off  and on, the user is encouraged to try to correct the 
interference by one or more of  the following measures:
• 
Reorient or relocate the receiving antenna.
• 
Increase the separation between the equipment and receiver.
• 
Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
• 
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any Changes or modifi cations not expressly approved by the party responsible for compliance could 
void the user’s authority to operate this equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)