DISH Network Solo 351 User Guide

15. When the check switch procedure finishes, you will see an 

 screen similar to the one below. The information for 

 and 

 should be the same:

•

Satellite - 

 twice. 

•

 - 

 twice. This is OK and does not indicate a problem 

with the receiver. 

•

Device Type - 

 twice. This indicates that your receiver has 

confirmed the connection with your DISH Pro Twin LNBF is working. 

16. Select 

 to return to the Point Dish screen. 

17. Make sure the screen shows 119 under Satellite. If not, move the highlight 

to 119 and press either the UP or DOWN ARROW. 

: The signal strength bar is used to help you aim the dish by showing 

the strength of the signal you are receiving. Look at the signal strength bar 

while you aim the dish.

: Don’t stand in front of the dish while you aim it, because your body 

will block the satellite signal. After you adjust the aim, let go of the dish so 

that you can get a good signal reading after the dish settles back in place by 

itself. 

18. Turn the dish back and forth very slowly, until the signal strength bar turns 

green. This shows you’ve found the signal.

E

le

v

a

ti

o

n