DISH Network Solo 351 User Guide

2. Select the satellite your dish will be pointed toward.
3. Select 

 under the 

.

4. Use the number buttons on the remote to enter your ZIP code to get the 

necessary azimuth and elevation. Write these numbers down in the spaces 
provided in the margin.

5. Mount the dish antenna and multi-dish switches following the mounting 

instructions that came with them and the DISH Pro Wiring Diagrams starting on 
page 94.

6. Connect two RG-6 cables from both S

 connections on the receiver 

to two available ports on the switch(es).

7. Connect the LNBF on the dish antenna to LNBF port 1 on the switch(es) using 

RG-6 cable. 

8. Select 

 from the 

 menu. When the 

screen opens, select 

. 

9. When 

 is complete, you will see an 

 screen 

similar to the one shown next. It will show a connection (“Conn” next to 
satellite) and 

 device under 1 (Dish Input). It may also show an X on the 

Transponder line. This is okay and does not mean there is a problem with the 
system.

10. Press CANCEL to exit back to the Point Dish menu. 
11. Point the dish for the strongest possible signal, following the instructions that 

came with it.