3com V7111 User Manual

 

The auxiliary files are configuration dat files that are loaded to the gateway (in addition to the 
ini

 file) to enable enhanced gateway provisioning. The following common auxiliary files are 

available: coefficient, Voice Prompts (MGCP only) and Call Progress Tones (CPT). For 
information on additional auxiliary files, refer to the V7111 User’s Manual. 

presents 

a brief description of the ini file and of each auxiliary file. 

 and Auxiliary Files Descriptions 

Load this file to provision the device’s parameters. The Embedded Web Server 
enables practically full device provisioning but customers may occasionally require 
new feature configuration parameters in which case this file is loaded. 
Note that loading the ini file only provisions parameters that are contained in the ini file. 
If a parameter is not specified in the ini file, values associated with that parameter are 
reset to a default value. These values may not be the same as the values that were 
configured for the VoIP gateway at the time of manufacture. 

 

 

This file contains the telephony interface configuration information for the VoIP 
gateway. This information includes telephony interface characteristics, such as DC and 
AC impedance, feeding current and ringing voltage. This file is specific to the type of 
telephony interface that the VoIP gateway supports. In most cases you have to load 
this type of file. 

 

 

The voice announcement file contains a set of Voice Prompts to be played by the 
V7111 during operation on Call Agent request. Only MGCP is supported. 

This is a region-specific, telephone exchange-dependent file that contains the Call 
Progress Tones levels and frequencies that the VoIP gateway uses. Default CPT file: 
U.S.A. 

To load an auxiliary file via the Embedded Web Server, follow these 6 steps: 

Open the ‘Auxiliary Files’ screen (Software Update menu > Load Auxiliary Files); the 
‘Auxiliary Files’ screen is displayed (shown 

). 

Click the Browse button that is in the field for the type of file you want to load. 

Navigate to the folder that contains the file you want to load. 

Click the file and click the Open button; the name and path of the file appear in the field 
next to the Browse button. 

Click the Send File button adjacent to the field that contains the name of the file you 
want to load. An asterisk in the screen section indicates that the file’s loading takes effect 
on-the-fly (e.g., Voice Prompts file). 

Repeat Steps 2 to 5 for each file you want to load. 

3Com VCX V7111 Analog Gateway Installation Guide 

 53