Polycom SIP 3.0.2 User Manual
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 60
This attribute also includes:
•
•
Shared Calls <shared/>
This configuration attribute is defined as follows:
call.singleKeyPressConference
0,1
0
If set to 1, the conference will be setup after a
user presses the Conference soft key or
Conference
Conference
key the first time. Also, all sound
effects (dial tone, DTMF tone while dialing and
ringing back) are heard by all existing
participants in the conference.
If set to 0 or Null, sound effects are only heard by
If set to 0 or Null, sound effects are only heard by
conference initiator (old behavior).
Only supported for SoundPoint IP 550, 560,650 .
Only supported for SoundPoint IP 550, 560,650 .
For all others, set to 0.
call.localConferenceCallHold
0, 1
0
If set to 0, a hold will happen for all legs when
conference is put on hold. (old behavior).
If set to 1, only the host is out of the conference,
If set to 1, only the host is out of the conference,
all other parties in conference continue to talk.
(new behavior).
If set to Null, the default value is 0.
Only supported for SoundPoint IP 550, 560,650 .
If set to Null, the default value is 0.
Only supported for SoundPoint IP 550, 560,650 .
For all others, set to 0.
call.transfer.blindPreferred
0,1
Null
If set to 1, the Blind soft key appears as a
transfer type.
If set to 0 or Null, the Normal soft key appears.
Note: This parameter is supported on the
SoundPoint IP 330/320 only.
If set to 0 or Null, the Normal soft key appears.
Note: This parameter is supported on the
SoundPoint IP 330/320 only.
Attribute
Permitted
Values
Values
Default
Interpretation
Attribute
Permitted
Values
Values
Default
Interpretation
call.shared.disableDivert
0, 1
1
If set to 1, disable diversion feature for shared
lines.
Note: This feature is disabled on most call
servers
Note: This feature is disabled on most call
servers
.
call.shared.seizeFailReorder
0, 1
1
If set to 1, play re-order tone locally on shared
line seize failure.