MicroNet Technology SP5100 User Manual

Command ping can test which the IP address is reachable or not.   
Usage: ping “xxx.xxx.xxx.xxx(IP address)” 
The message will display packets transmitting condition or no answer from the IP 
address. 
 

 

 
 

The command is for Peer-to-Peer Mode use only. Therefore, VoIP products such as 
SP5100 IP Phone that support Peer-to-Peer Mode are also available to be addressed 
on the SP5100 IP Phone phone book.   
 
•  -print: display phone book data. User can print all data in phone book by command     

(pbook –print). Furthermore, user can also print only a section of data by indicating 
parameter 'start_record' and 'end_record' (pbook –print “start prefix” “end prefix”). If 
parameter 'end_record' is omitted, only record 'start_record' will be display 
(pbook –print “start prefix”). 

 
•  -add: add a new record in phone book table by give a name and e164 number for 

the Gateway / Terminal IP address . 

(pbook –add name “X” ip “xxx.xxx.xxx.xxx” e164 “X”) 
User can set IP or URL address (Domain Name Server must be configured. Please 
refer to [ifaddr] command) 
 

•  -search: search any record such as ip address, name and e164 addressed on the 

phone book. 

 
•  -delete: delete a record with index listed in phone book table. (pbook –delete “index