Lg Electronics IP8540 User Manual

Page of 57
IP8540 User Guide 
 
 
 
 
 
 
2.2 AC/DC power adaptor  
 
The IP8540 ships without an AC/DC power adaptor. The IP8540 LAN Ethernet port supports IEEE802.3af 
PoE (Power-over-Ethernet), so an external power supply is not needed if your Ethernet switch supports 
PoE class 3.  If the installation requires an AC/DC power adaptor, select the adaptor for your region from 
the table below. 
 
Order Part Number 
Model Number 
Applicable Region 
TKTN9010201 
PLA12R-120(ASK)-R USA 
USA, Canada, Mexico 
TKTN9010601 
PLA12R-120(ASK-E)-R EUA 
Europe 
TKTN9010701 
PLA12R-120(ASK-K)-R GBR 
United Kingdom 
TKTN9010801 
PLA12R-120(ASK-S)-R AUS 
Australia 
TKTN9010901 
PLA12R-120(ASK-C)-R CHN 
China 
TKTN9011001 
PLA12R-120(ASK-H)-R KDX 
South Korea 
 
2.3 Optional accessory for wall-mount installation 
 
The IP8540 optionally can be wall mounted; you may wish to order the following part number to ensure 
secure placement of the handset when phone is wall mounted: 
 
Order Part Number 
Part Name 
TKTN9013701 
Handset Holder for Wall Mount 
 
 
2.4 Set-up 
 
Before connecting your new phone, take a moment to consider safety and reliability.  Use common sense 
when locating, connecting and using your IP8540. 
 
Locate the phone on a dry level surface. Keep the phone away from the edges of the surface to 
avoid the phone falling off the edge. 
 
Locate cables to avoid damage.  For example, do not locate under rugs or carpet.  Also, do not 
locate cables between the desktop and walls where they may be crushed, damaging the insulation. 
 
Check the cables regularly and, if damage is noted, disconnect the phone.  Contact your local 
representative for a replacement. 
 
Should liquid spill on the Phone, disconnect the unit from power and the network. 
 
Do not use during lightning storms.  Lightning presents a rare but potential lethal shock hazard. 
 
Clean IP8540 with a soft dry cloth; do not use liquid cleaners or sprays. 
 
Only attach peripherals specified by LG-Nortel. 
 
Always use caution when connecting to AC power.  Use only with a properly grounded standard 
AC power outlet and the AC/DC adaptor for the unit.