Snom 300 User Guide

s n o m   3 x 0   V o I P   P h o n e s

 

U s e r   M a n u a l

 

E n g l i s h

 

 

© snom technology AG 2007

 

Phone Configuration

  •   4 9

 

 

Compare the major release level of the latest available firmware version published on 

 with the firmware version installed on your phone. 

If they differ you are strongly advised not to conduct a manual update! 

Example: Latest available firmware version for snom 360 is 6.5.10 
•  Snom 360 (1): Installed: snom 360-SIP 4.5   use automatic update 
•  Snom 360 (2): Installed: snom 360-SIP 6.2.2   manual update can be used 
Firmware Update 

Action: Conduct a manual firmware update 

snom 300 

snom 320 

snom 360 

snom 370 

Copy the 

link (URL) of the appropriate firmware version X.Y.Z by right-clicking on the 

“File” Symbol   

Version 

Type  

File 

Size 

X.Y.Z applications  .bin  

<File Size> MB 

 

Access the phone’s web user interface 

 Setup   Software Update   Manual Software Update Setup   

Firmware 

and paste the 

link into the “Firmware” field. 

Start the update by clicking on Load 

 The phone reboots automatically and you are prompted to confirm the update. 

Press 

 to confirm or press 

 to abort the update process. 

The phone loads the new software from snom’s web server. This process may take 

some time depending on the <File Size> and the speed of your internet connection. 

 Warning: Any power interruption during the following process will most likely lead 

to a flash memory error. As a result the system cannot boot up anymore and the 

phone must be sent in for repairing at your own expense. 

After successful download the old firmware is erased and the new firmware is written 

into the phone’s flash memory.  

The phone reboots again and will be initialized using the previously stored phone 

configuration.  

Result: The firmware is updated. You can verify the successful update as described in 
chapter “Version Check” on page 48.