Panasonic BB-GT1540E User Manual

30

If your local network uses a DHCP 
(Dynamic Host Configuration Protocol) 
server for automatic IP address 
assignments, you do not need to change 
any settings. If your local network uses a 
static IP address, turn the DHCP 
connection mode off.
Leaving the DHCP connection mode on 
allows the base unit to receive an IP 
address automatically from a DHCP 
server on your local network.

Automatic setup (default) N
The base unit automatically obtains an 
IP address and other Internet connection 
settings (subnet mask, default gateway, 
and DNS server addresses).

K

 i {#}{5}{0}{0}

{V}

/{^}: “On”

M

 i {i}

L

Wait until the 4 indicator on the 
base unit turns green. When the 
4

 indicator lights in green, the 

setting is complete. Confirm your 
A number (page 31).

L

When the 4 indicator on the 
base unit does not light in green 
even if you wait for a few minutes, 
see page 24.

Note:
L

To view the Internet connection 
settings:
K

 i {#}{5}{0}{1} i When 

finished, press {i}.

Static setup N
If your local network does not use a 
DHCP server for automatic IP address 
assignments, turn the DHCP connection 
mode off first. Then set the static IP 
address and other Internet connection 
settings corresponding to your local 
network.

K

 i {#}{5}{0}{0}

{V}

/{^}: “Off”

M

 i {i}

K

 i {#}{5}{0}{1}

Set the IP address and other 
settings.
L

Push the joystick down {V} or up 
{^}

 to move between the 

following 5 items.

Enter the IP address in 
this data field.

L

Set 4 numbers (0-
255) separated by 
periods such as 
“192.168.0.253”.

Enter the subnet mask 
in this data field.

L

Set 4 numbers (0-
255) separated by 
periods such as 
“255.255.255.0”.

Enter the default 
gateway address in 
this data field.

L

Set 4 numbers (0-
255) separated by 
periods such as 
“192.168.0.1”.

GT15xxE.book  Page 30  Wednesday, August 1, 2007  11:59 AM