Polycom 1725-11530-310 User Manual

Page of 373
Administrator’s Guide SoundPoint IP / SoundStation IP 
A - 64
This attribute also includes:
Configuration <cfg/>
This configuration attribute is defined as follows:
Call Handling Configuration <call/>
This configuration attribute is defined as follows:
Attribute
Permitted 
Values
Default
Interpretation
httpd.cfg.enabled
0, 1
1
If set to 1, the HTTP server configuration interface 
will be enabled.
httpd.cfg.port
1-65535
80
Port is 80 for HTTP servers. Care should be taken 
when choosing an alternate port.
Attribute
Permitted 
Values
Default
Interpretation
call.rejectBusyOnDnd
0, 1
1
If set to 1, reject all incoming calls with the 
reason “busy” if do-not-disturb is enabled.
Note: This attribute is ignored when the line is 
configured as shared
. The reason being that 
even though one party has turned on DND, the 
other person/people sharing that line do not 
necessarily want all calls to that number diverted 
away.
Note: If server-based DND is enabled, this 
parameter is disabled
.
call.enableOnNotRegistered
0, 1
1
If set to 1, calls will be allowed when the phone is 
not successfully registered, otherwise, calls will 
not be permitted without a valid registration.
call.offeringTimeOut
positive 
integer
60
Time in seconds to allow an incoming call to ring 
before dropping the call, 0=infinite.
Note: The call diversion, no answer feature will 
take precedence over this feature if enabled. For 
more information, refer to 
 on page 
call.ringBackTimeOut
positive 
integer
60
Time in seconds to allow an outgoing call to 
remain in the ringback state before dropping the 
call, 0=infinite.