ZyXEL Communications p-2612HNU-FX User Manual

Chapter 5 WAN Setup

P-2612HNU-Fx User’s Guide

Note: You can configure up to eight (8) WAN services for each interface. 

Figure 18   Network > WAN > Internet Connection 

The following table describes the labels in this screen. 

Table 12   Network > WAN > Internet Connection

Interface

This shows the name of the interface used by this connection.

A default name nas followed by a number (for example, nas1) 
indicates the DSL interface. The name eth0.14 indicates the default 
Ethernet WAN interface (the physical Ethernet WAN port). 

The number after the dot (.) represents the VLAN ID number assigned 
to traffic sent through this connection.  

Description

This is the service name of this connection.

1 and 2 or 0 and 1 are the default VPI and VCI numbers. The last 
number represents the index number of connections over the same 
PVC or the VLAN ID number assigned to traffic sent through this 
connection.

Type

This shows the method of encapsulation used by this connection. 

Vlan8021p

This indicates the 802.1P priority level assigned to traffic sent through 
this connection. This displays N/A when there is no priority level 
assigned.

VlanMuxId

This indicates the VLAN ID number assigned to traffic sent through 
this connection. This displays N/A when there is no VLAN ID number 
assigned.

IGMP

This shows whether IGMP (Internet Group Multicast Protocol) is 
activated or not for this connection. IGMP is not available when the 
connection uses the bridging service.

NAT

This shows whether NAT is activated or not for this interface. NAT is 
not available when the connection uses the bridging service.

Modify

Click the Edit icon to configure the WAN connection.

Click the Remove icon to delete the WAN connection.

Add

Click Add to create a new connection.