ZyXEL Communications p-2612HNU-FX User Manual

Chapter 4 Status Screens

P-2612HNU-Fx User’s Guide

Use this table to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 

Figure 9   Network > LAN > Client List

The following table describes the labels in this screen.

Table 5   Network > LAN > Client List  

IP Address

Enter the IP address that you want to assign to the computer on your 
LAN with the MAC address that you will also specify.

MAC Address

Enter the MAC address of a computer on your LAN.

Add

Click Add to add a static DHCP entry. 

#

This is the index number of the static IP table entry (row).

Status

This field displays whether the client is connected to the ZyXEL Device.

Host Name 

This field displays the computer host name.

IP Address

This field displays the IP address relative to the # field listed above.

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local 
Area Network) is unique to your computer (six pairs of hexadecimal 
notation).

A network interface card such as an Ethernet adapter has a hardwired 
address that is assigned at the factory. This address follows an industry 
standard that ensures no other adapter has a similar address.

Reserve

Select the check box in the heading row to automatically select all 
check boxes or select the check box(es) in each entry to have the 
ZyXEL Device always assign the selected entry(ies)’s IP address(es) to 
the corresponding MAC address(es) (and host name(s)). You can select 
up to 128 entries in this table.  

Apply

Click this to save your changes back to the ZyXEL Device.

Reset

Click this to begin configuring this screen afresh.

Refresh

Click this to reload the DHCP table.