ZyXEL Communications FMG3025-D10A User Manual

Chapter 7 Home Networking

FMG3024-D10A / FMG3025-D10A Series User’s Guide

Network Setting > Home Networking > Static DHCP 

The following table describes the labels in this screen.

If you click Add new static lease in the Static DHCP screen, the following screen displays.

Static DHCP: Add

The following table describes the labels in this screen.

Network Setting > Home Networking > Static DHCP

Add new static 
lease

Click this to add a new static DHCP entry. 

#

This is the index number of the entry.

Status

This field displays whether the client is connected to the Device.

Host Name

This field displays the client host name.

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local Area 
Network) is unique to your computer (six pairs of hexadecimal notation).

A network interface card such as an Ethernet adapter has a hardwired address 
that is assigned at the factory. This address follows an industry standard that 
ensures no other adapter has a similar address.

IP Address

This field displays the IP address relative to the # field listed above.

Reserve

Select the check box in the heading row to automatically select all check boxes 
or select the check box(es) in each entry to have the Device always assign the 
selected entry(ies)’s IP address(es) to the corresponding MAC address(es) (and 
host name(s)). You can select up to 128 entries in this table. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Refresh

Click Refresh to reload the DHCP table.

Static DHCP: Add

MAC Address

Enter the MAC address of a computer on your LAN.

IP Address

Enter the IP address that you want to assign to the computer on your LAN with 
the MAC address that you will also specify.

Apply

Click Apply to save your changes.

Back

Click Back to exit this screen without saving.