ZyXEL Communications EMG5324-D10A User Manual
Chapter 6 Wireless
EMG5324-D10A User’s Guide
108
The following table describes the labels in this screen.
6.6 Scheduling Screen
Click Network Setting > Wireless > Scheduling to open the Wireless LAN Scheduling screen.
Use this screen to configure when the Device enables or disables the wireless LAN.
Use this screen to configure when the Device enables or disables the wireless LAN.
Figure 29
Network Setting > Wireless > Scheduling
The following table describes the labels in this screen.
Table 18
Network Setting > Wireless > WMM
LABEL
DESCRIPTION
Enable WMM of
SSID1~4
SSID1~4
This enables the Device to automatically give a service a priority level according to the ToS
value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service)
gives high priority to voice and video, which makes them run more smoothly.
value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service)
gives high priority to voice and video, which makes them run more smoothly.
Enable WMM
Automatic
Power Save
Deliver (APSD)
Automatic
Power Save
Deliver (APSD)
Click this to increase battery life for battery-powered wireless clients. APSD uses a longer
beacon interval when transmitting traffic that does not require a short packet exchange
interval.
beacon interval when transmitting traffic that does not require a short packet exchange
interval.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.
Table 19
Network Setting > Wireless > Scheduling
LABEL
DESCRIPTION
Wireless LAN
Scheduling
Scheduling
Select Enable to activate wireless LAN scheduling on your Device.
WLAN status
Select On or Off to enable or disable the wireless LAN.
Day
Select the day(s) you want to turn the wireless LAN on or off.
Between the
following times
following times
Specify the time period during which to apply the schedule.
For example, you want the wireless network to be only available during work hours. Check
Mon ~ Fri in the day column, and specify 8:00 ~ 18:00 in the time table.
Mon ~ Fri in the day column, and specify 8:00 ~ 18:00 in the time table.