ZyXEL Communications EMG5324-D10A User Manual
Chapter 7 Home Networking
EMG5324-D10A User’s Guide
124
Supported OSs
Your operating system must support TCP/IP ports for printing and be compatible with the RAW (port
9100) protocol.
9100) protocol.
The following OSs support Device’s printer sharing feature.
• Microsoft Windows 95, Windows 98 SE (Second Edition), Windows Me, Windows NT 4.0, Windows
2000, Windows XP or Macintosh OS X.
7.2 The LAN Setup Screen
Click Network Setting > Home Networking to open the LAN Setup screen. Use this screen to
set the Local Area Network IP address and subnet mask of your Device and configure the DNS
server information that the Device sends to the DHCP client devices on the LAN.
set the Local Area Network IP address and subnet mask of your Device and configure the DNS
server information that the Device sends to the DHCP client devices on the LAN.
Figure 37
Network Setting > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 22
Network Setting > Home Networking > LAN Setup
LABEL
DESCRIPTION
LAN IP Setup
IP Address
Enter the LAN IP address you want to assign to your Device in dotted decimal notation,
for example, 192.168.1.1 (factory default).
for example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP address you enter, so do not change this field unless you are instructed to
do so.
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP address you enter, so do not change this field unless you are instructed to
do so.
DHCP Server State