ZyXEL Communications EMG5324-D10A User Manual
Chapter 13 Firewall
EMG5324-D10A User’s Guide
182
13.4.1 Add/Edit an ACL Rule
Click Add new ACL rule or the Edit icon next to an existing ACL rule in the Access Control
screen. The following screen displays.
screen. The following screen displays.
Figure 90
Access Control: Add/Edit
The following table describes the labels in this screen.
Table 56
Access Control: Add/Edit
LABEL
DESCRIPTION
Filter Name
Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
underscores, and dashes.
Source Address
Type
Type
Select the type of source address.
Source IP
Address Start/
End
Address Start/
End
When the Source Address Type field is configured as Single, enter the IP address of the
source. When the Source Address Type field is configured as Range, enter the range of
source IP address.
source. When the Source Address Type field is configured as Range, enter the range of
source IP address.
Destination
Address Type
Address Type
Select the type of destination address.
Source IP
Address Start/
End
Address Start/
End
When the Destination Address Type field is configured as Single, enter the IP address of
the source. When the Destination Address Type field is configured as Range, enter the
range of source IP address.
the source. When the Destination Address Type field is configured as Range, enter the
range of source IP address.
Select Protocol
Select the transport layer protocol that defines your customized port from the drop-down
list box. The specific protocol rule sets you add in the Security > Firewall > Service >
Add screen display in this list.
list box. The specific protocol rule sets you add in the Security > Firewall > Service >
Add screen display in this list.
Protocol
This field is displayed only when you select Specific Protocol in Select Protocol.
Choose the IP port (TCP, UDP, ICMP, or Others) that defines your customized port from
the drop-down list box.
the drop-down list box.
Protocol
Number
Number
If you select Others in the Select Protocol field, enter a single port number or the range
of port numbers of the source.
of port numbers of the source.