ZyXEL Communications EMG5324-D10A User Manual

Chapter 18 VoIP

EMG5324-D10A User’s Guide

The Device uses a SIP account to make outgoing VoIP calls and check if an incoming call’s 
destination number matches your SIP account’s SIP number. In order to make or receive a VoIP 
call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account 
contains information that allows your Device to connect to your VoIP service provider. 

See 

 for how to map a SIP account to a phone port.

To access the following screen, click VoIP > SIP > SIP Account.

VoIP > SIP > SIP Account

The following table describes the labels in this screen.

Dialing Interval Selection

Dialing Interval 
Selection

Enter the number of seconds the Device should wait after you stop dialing numbers before it 
makes the phone call. The value depends on how quickly you dial phone numbers.

Phone Key 
Config

Specify the key combinations for certain functions of the SIP phone.

PSTN Fail Over 

Select this check box if you want to redirect the outgoing calls to the PSTN line (that do not 
use the Internet) when your SIP account is unregistered or SIP call has failed. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

VoIP > SIP > SIP Service Provider (continued)

VoIP > SIP > SIP Account

#

This is the index number of the entry.

Active

This shows whether the SIP account is activated or not.

A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP 
account is activated.

SIP Account 

This shows the name of the SIP account.

SIP Service 
Provider

This shows the name of the SIP service provider.

Account No.

This shows the SIP number.

Modify

Click the Edit icon to configure the SIP account.

Click the Delete icon to delete this SIP account from the Device.