ZyXEL Communications EMG5324-D10A User Manual

Chapter 23 The SNMP Screen

EMG5324-D10A User’s Guide

• GetNext - Allows the manager to retrieve the next object variable from a table or list within an 

agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it 
initiates a Get operation, followed by a series of GetNext operations. 

• Set - Allows the manager to set values for object variables within an agent. 
• Trap - Used by the agent to inform the manager of some events.

To change your Device’s SNMP settings, click Maintenance > SNMP to display the screen as 
shown.

Maintenance > SNMP 

The following table describes the labels in this screen. 

Configuration > Management > Remote MGMT > SNMP

Get Community Enter the password for the incoming Get and GetNext requests from the management 

station. The default is public and allows all requests.

Set Community Enter the password for incoming Set requests from the management station. The default is 

public and allows all requests.

Trap 
Community

Type the trap community, which is the password sent with each trap to the SNMP manager. 
The default is public and allows all requests.

Trap 
Destination

Type the IP address of the station to send your SNMP traps to.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.