ZyXEL Communications EMG5324-D10A User Manual
Chapter 3 Tutorials
EMG5324-D10A User’s Guide
69
Note: QoS is applied to traffic flowing out of the Device.
Traffic that does not match this class is assigned a priority queue based on the internal QoS
mapping table on the Device.
mapping table on the Device.
QoS Example
1
Click Network Setting > QoS > General and check Active. Set your WAN Managed Upstream
Bandwidth to 10,000 kbps (or leave this blank to have the Device automatically determine this
figure). Click Apply to save your settings.
Bandwidth to 10,000 kbps (or leave this blank to have the Device automatically determine this
figure). Click Apply to save your settings.
Tutorial: Advanced > QoS
2
Go to Network Setting > QoS > Queue Setup. Click Add new Queue to create a new queue. In
the screen that opens, check Active and enter or select the following values, then click Apply.
the screen that opens, check Active and enter or select the following values, then click Apply.
• Name: Email
• Priority: 7 (High)
• Weight: 15
• Rate Limit: 5,000 (kbps)
• Priority: 7 (High)
• Weight: 15
• Rate Limit: 5,000 (kbps)
Tutorial: Advanced > QoS > Queue Setup
10,000 kbps
DSL
E-mail: Queue 7
Your computer
IP=192.168.1.23
A colleague’s computer
Other traffic: Automatic classifier
and/or
MAC=AA:FF:AA:FF:AA:FF
MAC=AA:FF:AA:FF:AA:FF
ZyXEL Device