ZyXEL Communications EMG5324-D10A User Manual
Chapter 10 Network Address Translation (NAT)
EMG5324-D10A User’s Guide
165
10.3 The DMZ Screen
In addition to the servers for specified services, NAT supports a default server IP address. A default
server receives packets from ports that are not specified in the NAT Port Forwarding Setup
screen.
server receives packets from ports that are not specified in the NAT Port Forwarding Setup
screen.
Figure 74
Network Setting > NAT > DMZ
The following table describes the fields in this screen.
10.4 The Sessions Screen
Use the Sessions screen to limit the number of concurrent NAT sessions each client can use.
Click Network Setting > NAT > Sessions to display the following screen.
Figure 75
Network Setting > NAT > Sessions
Table 42
Network Setting > NAT > DMZ
LABEL
DESCRIPTION
Default Server
Address
Address
Enter the IP address of the default server which receives packets from ports that are not
specified in the NAT Port Forwarding screen.
specified in the NAT Port Forwarding screen.
Note: If you do not assign a Default Server Address, the Device discards all packets
received for ports that are not specified in the NAT Port Forwarding screen.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.