ZyXEL Communications FMG3024-D10A User Manual

 Chapter 5 Broadband

FMG3024-D10A / FMG3025-D10A Series User’s Guide

IGMP Proxy Enable  Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to 

establish membership in a Multicast group - it is not used to carry user data.

Select this option to have the Device act as an IGMP proxy on this connection. 
This allows the Device to get subscribing information and maintain a joined 
member list for each multicast group. It can reduce multicast traffic 
significantly.

Apply as Default 
Gateway

Select this option to have the Device use the WAN interface of this connection 
as the system default gateway.

DNS Server

The section is not available when you select Bridge in the WAN Service Type 
field.

Obtain DNS info 
Automatically

Select this to have the Device get the DNS server addresses from the ISP 
automatically.

Use the following 
Static DNS IP 
Address

Select this to have the Device use the DNS server addresses you configure 
manually.

Primary DNS 
Server

Enter the first DNS server address assigned by the ISP.

Secondary DNS 
Server

Enter the second DNS server address assigned by the ISP.

IPv6 Address

This section is not available when you select Disable in the IPv6/IPv4 
DualStack field. 

Obtain IPv6 
Address 
Automatically

Select this option if you want to have the Device use the IPv6 prefix from the 
connected router’s Router Advertisement (RA) to generate an IPv6 address. 

Enable Non-
temporary 
addresses

The DHCPv6 server controls the time at which the client contacts with the 
server to extend the lifetimes on any addresses before the lifetimes expire. 
After a first time limit specified by the server is reached, the client sends the 
server a Renew message. Select this option to have the server renew the lease 
before the second server specified time limit is reached.

Enable Prefix 
Delegation

Select this to enable Prefix Delegation. This enables an IPv6 router to use the 
IPv6 prefix (network address) received from the ISP (or a connected uplink 
router) for its LAN. 

Static IPv6 Address  Select this option if you have a fixed IPv6 address assigned by your ISP.

IPv6 Address 

Enter the static IPv6 address provided by your ISP using colon (:) hexadecimal 
notation.

Prefix length

Enter the bit number of the IPv6 subnet mask provided by your ISP.

IPv6 Default 

Gateway 

Enter the IPv6 address of the default outgoing gateway using a colon (:) 
hexadecimal notation.

IPv6 DNS Server

Select whether you want to obtain the IPv6 DNS server addresses 
automatically or configure them manually.

Obtain IPv6 DNS 
info Automatically 

Select this to have the Device get the IPv6 DNS server addresses from the ISP 
automatically. 

Use the following 
Static DNS IPv6 
Address 

Select this to have the Device use the DNS server addresses you configure 
manually.

Primary IPv6 

DNS Server 

Enter the first IPv6 DNS server address assigned by the ISP.

Secondary IPv6 

DNS Server

Enter the second IPv6 DNS server address assigned by the ISP.

Broadband Add/Edit: Routing - PPPoE  (continued)