Avaya 1210 User Manual

1.

Plug the headset cord into the headset jack on the back of the IP 
Deskphone marked with the 

)

 symbol.

 shows the connections on the back of the IP 

Deskphone.

2.

Thread the cord through the channel in the side of the foot stand.

3.

Set up the headset according to the headset instructions.

Your IP Deskphone supports AC power and Power over Ethernet (PoE). 
For AC power, use only the Avaya-approved Global Power Supply 
(N0146475) and the country-specific IEC cable that you can order 
separately. To use PoE, your connected LAN must support PoE.

Note: Your Avaya 1210 IP Deskphone supports AC power and PoE 
options, including IEEE 802.3 standard power. To use local AC 
power, you can order the optional AC adapter separately. To use 
PoE, where power is delivered over the CAT5 cable, the LAN must 
support PoE, and you do not require an AC adapter.

1.

Connect the DC barrel connector to the power jack on the back of the 
IP Deskphone. 

2.

Thread the cable through the channel in the foot stand to secure the 
cable. 

3.

Plug the country-specific IEC cable into the Global Power Supply, 
and then plug the Global Power Supply into the nearest AC power 
outlet.

Use your Avaya 1210 IP Deskphone with 
the approved Avaya AC Adapter (model 
#N0089601).