Aastra Telecom C53I User Guide

Hard Key Parameters

A-110

41-001160-00, Rev 01  Release 2.0  

IP Phone Administrator Guide

The value of "N" for the following parameters is dependent on the number of 
softkeys available on the55i, 57i, and 57i CT models. See the table above for 
applicable values.

Parameter – 

(in Web UI)

Operation->Softkeys and XML

aastra.cfg, <mac>.cfg

The type of softkey to configure. Valid types are:

none - Indicates softkey and/or programmable key is disabled.

•

line - Indicates softkey and/or programmable key is configured for 

line use.

•

speeddial - Indicates softkey and/or programmable key is configured 

for speeddial use. Speeddial is applicable to the 536EM and 560EM 

also.

•

do not disturb (dnd)- Indicates softkey and/or programmable key is 

configured for do not disturb on the phone. This option is "Do Not 

Disturb" in the Aastra Web UI).

•

blf - Indicates softkey and/or programmable key is configured for 

Busy Lamp Field (BLF) use. User can dial out on a BLF configured 

key. BLF is applicable to the 536EM and 560EM also.

•

list - Indicates softkey and/or programmable key is configured for 

BLF list use. (This option is BLF/List in the Aastra Web UI). User can 

dial out on a BLF List configured key.

•

xml - Indicates the softkey and/or programmable key is configured to 

accept an XML application for accessing customized XML services. 

You can also specify an XML softkey URL for this option.

•

flash - Indicates the softkey and/or programmable key is set to 

generate a flash event when it is pressed on the 57i and 57i CT, or a 

feature key is pressed on the 57i CT handset. The IP phone 

generates flash events only when a call is connected and there is an 

active RTP stream (for example, when the call is not on hold).

•

sprecode - Indicates the softkey and/or programmable key is 

configured to automatically activate specific services offered by the 

server. For example, if the sprecode value of *82 is configured, then 

by pressing the softkey, *82 automatically activates a service 

provided by the server.

•

park - Indicates the softkey and/or programmable key is configured to 

park incoming calls when pressed.

•

pickup - Indicates the softkey and/or programmable key is configured 

to pick up parked calls when pressed.

•

lcr - Indicates the softkey and/or programmable key is configured for 

“last call return” when pressed.