Aastra Telecom C53I User Guide

How to Create an XML Application

41-001160-00, Rev 01  Release 2.0

G-41

Creating an XML Application

You can enable or disable a “Beep”option to indicate a status on the phone using 
the Status Message object (AastraIPPhoneStatus), the configuration files, or the 
Aastra Web UI.

When the phone receives a status message, the BEEP notifies the user that the 
message is displaying. The following attribute in the AastraIPPhoneStatus object 
enables/disables the BEEP from being heard:

< AastraIPPhoneStatus Beep="yes|no">   

 (case sensitive)

This attribute is optional. If notification is required, the attribute must be in the 
ROOT. If the BEEP attribute is set to "yes" (i.e. Beep="yes") then it is an 
indication to the phone to sound a beep when it receives the object.  If the Beep 
attribute is set to "no" (i.e. Beep="no") or not present, then the default behavior is 
no beep is heard when the object arrives to the phone.

The IP phones support a scroll delay option that allows you to set the time delay, 
in seconds, between the scrolling of each status message on the phone. The default 
time is 5 seconds for each message to display before scrolling to the next message. 
You can configure this option via the configuration files or the Aastra Web UI. 
Changes are dynamic and apply to the phone immediately.

For enabling/disabling a status message beep using the 

configuration files and the Aastra Web UI, see 

, the section, 

 on 

The value set in the configuration files and Aastra Web UI override 

the attribute you specify for the AastraIPPhoneStatus object.

For more information about setting the scroll delay option, see 

.