Aastra Telecom 9480i CT Series User Manual
Operational, Basic, and Advanced Parameters
A-42
41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
PC Port (Ethernet Port 1) Parameters
Parameter –
vlan id port 1
vlan id port 1
VLAN ID
(for PC Port in
Web UI)
(for PC Port in
Web UI)
IP phone UI
Options->Administrator Menu->
Network Settings->VLAN->
Passthrough->VLAN ID
Network Settings->VLAN->
Passthrough->VLAN ID
Aastra Web UI
Advanced Settings->Network->VLAN->Port 1
Configuration Files
aastra.cfg, <mac>.cfg
Description
Specifies the VLAN ID used to pass packets through to a PC via Port 1.
Note: If you set the VLAN id port 1 (passthrough port) to 4095, all
untagged packets are sent to this port. The following is an example of
configuring the phone on a VLAN where all untagged packets are sent to
the passthrough port.
untagged packets are sent to this port. The following is an example of
configuring the phone on a VLAN where all untagged packets are sent to
the passthrough port.
Example
You enable tagging on the phone port as normal but set the
passthrough port (VLAN id port 1) to 4095. The following example
sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
You enable tagging on the phone port as normal but set the
passthrough port (VLAN id port 1) to 4095. The following example
sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
Format
Integer
Default Value
1
Range
1 to 4095
Example
VLAN id port 1: 3
Draft 1