Aastra Telecom 9480i CT Series User Manual
Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4
A-65
SIP Local Dial Plan Settings
Parameter –
sip dial plan
sip dial plan
Local Dial Plan
(in Web UI)
(in Web UI)
Aastra Web UI
Basic Settings->Preferences
Configuration Files
aastra.cfg, <mac>.cfg
Description
A dial plan describes the number and pattern of digits that a user dials to
reach a particular telephone number. The SIP local dial plan is as follows:
Symbol
reach a particular telephone number. The SIP local dial plan is as follows:
Symbol
Description
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Digit symbol
X
Match any digit symbol (wildcard)
*, #, .
Other keypad symbol; # can terminate
a dial string
a dial string
|
Expression inclusive OR
+
0 or more of the preceding digit symbol
or [] expression
or [] expression
[]
Symbol inclusive OR
-
Used only with [], represent a range of
acceptable symbols; For example, [2-8]
acceptable symbols; For example, [2-8]
“,” (open/close quotes)
In the configuration files, enter the sip dial
plan value using quotes.
plan value using quotes.
.;.
Used when a secondary dial tone is
required on the phone. (For example,
“9;xxxxxx”, when a user has to dial “9” to get
and outside line and needs a secondary dial
tone presented.
required on the phone. (For example,
“9;xxxxxx”, when a user has to dial “9” to get
and outside line and needs a secondary dial
tone presented.
Note: You can configure prefix dialing by adding a prepend digit to the
dial string. For example, if you add a prepend map of
“[2-9]XXXXXXXXX,91”, the IP phone adds the digits “91” to any 10-digit
number beginning with any digit from 2 to 9 that is dialed out. Other
examples of prepend mappings are:
dial string. For example, if you add a prepend map of
“[2-9]XXXXXXXXX,91”, the IP phone adds the digits “91” to any 10-digit
number beginning with any digit from 2 to 9 that is dialed out. Other
examples of prepend mappings are:
•
1X+#,9 (Prepends 9 to any digit string beginning with “1” and
terminating with “#”.)
terminating with “#”.)
•
6XXX,579 (Prepends “579” to any 4-digit string starting with “6”.)
•
[4-6]XXXXXX,78 (Prepends “78” to any 7-digit string starting with “4”,
“5”, or “6”.
“5”, or “6”.
Format
Alphanumeric characters
Default Value
X+#|XX+*
Range
Up to 512 alphanumeric characters.
Note: If a User enters a dial plan longer than 512 characters, or a parsing
error occurs, the phone uses the default dial plan of “x+#|xx+*”. If this is
the case, the Administrator cannot change the dial plan from the
configuration files. The dial plan must be changed from the Aastra Web
UI.
error occurs, the phone uses the default dial plan of “x+#|xx+*”. If this is
the case, the Administrator cannot change the dial plan from the
configuration files. The dial plan must be changed from the Aastra Web
UI.
Example
sip dial plan: "X+#|XXX+*"
Draft 1