Aastra Telecom 9480i CT Series User Manual

A-120

41-001160-03, Rev 00, Release 2.4 

IP Phone Administrator Guide

Parameter – 
sip autodial timeout

Autodial Timeout
(in Web UI)

Advanced Settings->Global SIP->
Autodial Settings

Configuration Files aastra.cfg, <mac>.cfg

Globally specifies the time, in seconds, that the phone waits to dial a 
preconfigured number after the handset is lifted from the IP phone 
cradle. 

If this parameter is set to 0 (hotline), the phone immediately dials a 
preconfigured number when you lift the handset. If this parameter is set 
to a value greater than 0, the phone waits the specified number of 
seconds before dialing the preconfigured number (warmline) when you 
lift the handset. 

Default is 0 (hotline). 

Integer

0

0 to 120

sip autodial timeout: 30

Parameter – 
sip lineN autodial number

Autodial Number
(in Web UI)

Advanced Settings->LineN->Autodial Settings

Configuration Files aastra.cfg, <mac>.cfg

On a per-line basis, this parameter specifies the SIP phone number that 
the IP phone autodials when the handset is lifted from the phone cradle. 
Valid values can be:

-1

(Default) The phone uses the global 
autodial setting for this line.

Blank

(Empty field) Disables autodial on this line.

Valid SIP Number

Dials the SIP number specified for this line.

Integer

-1

Any valid SIP number. 

sip line1 autodial number: 8500

Draft 1