Aastra Telecom 53I User Manual
Administrator Level Options
3-32
41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Administrator Options
Basic Network Settings
If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone
automatically configures all of the Network settings. If the phone cannot populate
the Network settings, or if DHCP is disabled, you can set the Network options
manually.
automatically configures all of the Network settings. If the phone cannot populate
the Network settings, or if DHCP is disabled, you can set the Network options
manually.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description
DHCP
DHCP
dhcp
Enables or disables DHCP.
Enabling DHCP populates the
required network information. The
DHCP server serves the network
information that the IP phone
requires. If the IP phone is unable to
get any required information, then
you must enter it manually. DHCP
populates the following network
information:
IP Address, Subnet Mask, Gateway,
Broadcast Address, Domain Name
Servers (DNS), TFTP, HTTP
HTTPS, and FTP servers, and
Timer Servers.
Enabling DHCP populates the
required network information. The
DHCP server serves the network
information that the IP phone
requires. If the IP phone is unable to
get any required information, then
you must enter it manually. DHCP
populates the following network
information:
IP Address, Subnet Mask, Gateway,
Broadcast Address, Domain Name
Servers (DNS), TFTP, HTTP
HTTPS, and FTP servers, and
Timer Servers.
Note: For DHCP to automatically
populate the IP address or qualified
domain name for the TFTP server,
your DHCP server must support
Option 66.
populate the IP address or qualified
domain name for the TFTP server,
your DHCP server must support
Option 66.
For more information, see
IP Address
IP Address
ip
IP address of the IP phone. To
assign a static IP address, disable
DHCP.
assign a static IP address, disable
DHCP.
For more information, see