Aastra Telecom 1000 User Manual

Page of 118
 
 
 
Copyright  IPitomy Communication, LLC  
7
 0007VRF 
Before Getting Started 
Panning before getting started will make the setup and installation of the IPitomy 1000 simple. 
IPitomy has created an Installation Worksheet to assist in recording business and system 
information used in planning system setup and installation. This Checklist can be downloaded 
from IPitomy.com in the Dealer Section of the Web site. 
Connecting the System 
Hardware Setup 
The IPitomy 1000 comes assembled and ready to install. The system requires connection 
to the PSTN for analog or T1 lines. It requires telephones to be connected to the local 
area network (LAN). Broadband access must also be established for VoIP connectivity 
(allowing remote extensions and remote management). 
 
 
Connecting the Phone Lines and FAX Machines 
The IP1000 is equipped to support analog, gateway or SIP connections. Analog lines are 
connected with internal hardware resources. A gateway connects analog telephone lines 
by registering itself as a SIP provider over the LAN. SIP providers create a direct 
connection to the system.  
Embedded Analog Phone Ports 
The IP1000 has analog phone ports and analog line ports embedded on board: 
  Two Analog Phone Ports  The IP1000 has two analog phone ports embedded on 
board for connectivity to FAX machine, analog phones or cordless phones with FXS 
interfaces. 
  Two Analog Line Ports  The IP1000 has two analog line ports embedded on board 
for PSTN connectivity.