Aastra Telecom 1000 User Manual
Copyright IPitomy Communication, LLC
15
0007VRF
Setting Internet Connection Type
The IP1000 supports six connection types: Automatic Configuration – DHCP, Static IP,
PPPoE, PPTP, L2TP, and Telstra Cable. Each setup screen and available features will
differ depending on what kind of connection type you select.
The IP1000 supports six connection types: Automatic Configuration – DHCP, Static IP,
PPPoE, PPTP, L2TP, and Telstra Cable. Each setup screen and available features will
differ depending on what kind of connection type you select.
Automatic Configuration (DHCP) – By default, the IP1000’s Internet Connection
Type is set to Automatic Configuration (DHCP), and it should be used only if your ISP
supports DHCP or you are connecting through a dynamic IP address.
supports DHCP or you are connecting through a dynamic IP address.
Static IP – If a permanent IP address is provided then select Static IP. And
settings for following network attributes are required. Contact service provide or
the network administrator for any Information missed.
the network administrator for any Information missed.
o Internet IP Address – Normally the static IP address is a public IP address
provided by service provider; it is used for connecting to Internet. If it is a local
IP address assigned by the network administrator; the router function in
IP1000 may need to be disabled.
IP address assigned by the network administrator; the router function in
IP1000 may need to be disabled.
o Subnet Mask – The subnet mask Information should be provided along
with IP address.
o Default Gateway – The IP address for the default network gateway, it is the
information service provider should provide.
o DNS 1-3 – Service provider will provide at least IP address for one DNS
(Domain Name System) server. At most three DNS servers can be set.
PPPoE –Some DSL service providers use PPPoE (Point-to-Point Protocol over