Aastra Telecom SIP User Manual
Model 480i SIP Admin Guide 8
480i IP Phone Configuration
Note: At this point modiÞcations performed to the User name, Screen name,
Authentication name and Password affect line 1 of the 480i only.
ModiÞcations to the other lines should be done through the <mac>.cfg Þle.
The NAT IP Address and NAT Port are currently not supported and will have no
effect when set.
ModiÞcations to the other lines should be done through the <mac>.cfg Þle.
The NAT IP Address and NAT Port are currently not supported and will have no
effect when set.
Setting Parameters through Configuration Files
The following are the parameters that can be used to conÞgure the 480i
phone through the conÞguration Þles – aastra.cfg and <mac>.cfg. The
"aastra.cfg" Þle conÞgures the settings server wide, while the <mac>
conÞgures only the phones with the MAC address for which the Þle is
named. The settings in the "aastra.cfg" Þle will be overriden by the settings
which also appear in the <mac> cfg Þle.
phone through the conÞguration Þles – aastra.cfg and <mac>.cfg. The
"aastra.cfg" Þle conÞgures the settings server wide, while the <mac>
conÞgures only the phones with the MAC address for which the Þle is
named. The settings in the "aastra.cfg" Þle will be overriden by the settings
which also appear in the <mac> cfg Þle.