Aastra Telecom SIP User Manual

 

 

 

Model 480i SIP Admin Guide

 

Press the 

 

£

 

button on the 

phone to enter the options list

 

Use the 

 

r

 

 and 

 

s

 

 to scroll 

through the list of options

 

Press the 

 

Show

 

 softkey, the 

 

4 

 

button or press the number 
corresponding to the option to 
select an option

 

Use the softkeys to change a 
selected option

 

Press the 

 

Done 

 

softkey at any 

time to save the change and exit 
the current option

 

Press the 

 

Cancel 

 

softkey, the 

 

3

 

 

button or the 

 

k

 

 button at 

any time to exit without saving 
the changes

 

Some options in the phone’s 
options list are considered 
administrator level options and 
require the administrator user 
name and password. When 
attempting to access administrator 
level options, the phone will 
prompt for the administrator 
password before allowing access. 
The default password for the 
administrator is “22222”. For all 
other phone options, please refer 
to the 

 

.

The administrator level options in 
the phone’s Options List are:
• “

 

8.Network

 

”

• “

 

9.SIP Settings

 

”

• “

 

4.Factory Default

 

” found 

under option “

 

10.Phone Status

 

”

 

If DHCP is enabled, all the 
Network settings are automatically 
conÞgured. The 480i’s Þrmware 
allows the network settings to be 
manually entered, if for any reason 
the phone cannot populate any of 
the settings with DHCP enabled. 
If DHCP is disabled the following 
network settings can be conÞgured 
manually: 

 

This turns DHCP on or 
off. IP Address, Subnet Mask 
and Gateway options are 
automatically populated and 
are read-only when DHCP is 
used. DHCP is used by default.

 

This is the phone’s IP address. 
To assign a static IP address to the 
phone, disable DHCP. 

 

To assign your own subnet mask 
to the phone, disable DHCP.

 

To assign your own gateway IP 
address, disable DHCP.

 

To assign your own DNS 
addresses, disable DHCP.

 

This is the TFTP server’s IP 
address.