Aastra Telecom 55I User Manual

Configuration Methods

2-14

41-001160-00, Release 2.1, Rev 04  

IP Phone Administrator Guide

The Aastra Web UI is enabled by default on the IP phones. A System 
Administrator can disable the Aastra Web UI on a single phone or on all phones if 
required using the configuration files. Use the following procedure to enable and 
disable the Aastra Web UI.

Allows you to specify the SIP Root and Intermediate 
Certificate files to use when the phone uses the TLS 
transport protocol to setup a call.

(Applicable to Administrator Only)

Allows you to perform troubleshooting tasks whereby the 
results can be forwarded to Aastra Technical Support for 
analyzing and troubleshooting.

(Applicable to Administrator Only)

1

Using a text-based editing application, open the <mac>.cfg file if you want to disable the Web UI on a 
single phone. Open the aastra.cfg file to disable the Web UI on all phones

2

Enter the following parameter:

Note: A value of zero (0) disables the Web UI on the phone. A value of 1 enables the Web UI.

3

Save the changes and close the <mac>.cfg or the aastra.cfg file.

4

Restart the phone to apply the changes. The Aastra Web UI is disabled for a single IP phone or for all 
phones.