Aastra Telecom 55I User Manual

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters

41-001160-00, Release 2.1, Rev 04

A-145

Configuration Parameters

•

The value of "N" for the following parameters is dependent on the number of 
programmable keys available on the 53i models. See the table on 

the applicable values

.

Parameter – 

(in Web UI)

Operation->Programmable Keys

Configuration Files aastra.cfg, <mac>.cfg

The type of programmable key to configure. Valid types are:

none  - Indicates no setting for programmable key.

•

line - Indicates programmable key is configured for line use.

•

speeddial - Indicates programmable key is configured for speeddial 

use. You can configure a programmable key to speeddial a specific 

number by pressing that key. Optionally, you can also configure a 

speeddial key to dial prefix numbers. With this option, the prefix 

numbers automatically dial when you press the programmable key, 

and the phone waits for you to enter the remaining numbers to dial.

Note: When there is an active call, the speeddial keys send DTMF 

digits through the active voice path.  To dial out, you have to first put 

the active call on hold and then press the speeddial key.

•

dnd - Indicates programmable key is configured for do not disturb 

on the phone. This option is "Do Not Disturb" in the Aastra Web 

UI).

•

blf - Indicates programmable key is configured for Busy Lamp Field 

(BLF) use. User can dial out on a BLF configured key.

•

list - Indicates programmable key is configured for BLF list use. 

User can dial out on a BLF List configured key.

•

acd - (for Sylantro Servers only) Indicates the programmable key is 

configured for auto call distribution (called “Auto Call Distribution” 

in the Aastra Web UI). The ACD feature allows the Sylantro server 

to distribute calls from a queue to registered IP phone users 

(agents).

•

dcp - (for Sylantro Servers only) Indicates the programmable key is 

configured for either directed call pickup or group call pickup (called 

“Directed Call Pickup” in the Aastra Web UI). The Directed Call 

Pickup/Group Call Pickup feature allows you to intercept or pickup a 

call on a monitored extension or a group of monitored extensions.

•

xml - Indicates programmable key is configured to accept an XML 

application for accessing customized XML services. You can also 

specify an XML softkey URL for this option.

•

flash - Indicates programmable key is set to generate a flash event 

when it is pressed on the 53i. The IP phone generates flash events 

only when a call is connected and there is an active RTP stream (for 

example, when the call is not on hold).