Aastra Telecom 9480i Series User Manual
Administrator Level Options
3-74
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Reference
For more information about setting the Action URIs for XML applications, see
on
Action URI Disconnected
The phones allow an Administrator to specify a URI to allow a disconnect event
to occur when the phone transitions from any active state (outgoing, incoming,
connected, or calling) to an idle state.
to occur when the phone transitions from any active state (outgoing, incoming,
connected, or calling) to an idle state.
Reference
For more information about configuring the Action URI Disconnected parameter,
see
see
on
XML SIP Notify Events and Action URIs
In order for an XML push to bypass the NAT/firewall, the phone supports a
proprietary SIP NOTIFY event (aastra-xml) with or without XML content.
proprietary SIP NOTIFY event (aastra-xml) with or without XML content.
If XML content is provided in the SIP NOTIFY, it is processed directly by the
phone as it is done for an XML PUSH.
phone as it is done for an XML PUSH.
Reference
For more information about enabling the XML SIP Notify on the IP Phones, see
Chapter 5, the section,
Chapter 5, the section,
Polling Action URIs
Another way to reach a phone behind a NAT/firewall is to have the phone make an
XML call at periodic intervals. An Administrator can use the action uri poll to
command the phone to perform an XML call at configurable intervals.
XML call at periodic intervals. An Administrator can use the action uri poll to
command the phone to perform an XML call at configurable intervals.
An Administrator can specify the URI to be called and specify the interval
between polls. Configuration of this feature is dynamic (no reboot required).
between polls. Configuration of this feature is dynamic (no reboot required).
Reference
For more information about configuring the polling and polling interval of Action
URIs, see
URIs, see
on