Aastra Telecom 9480i Series User Manual

41-001160-03, Rev 00, Releaes 2.4

4-51

Configuring Network and Session Initiation Protocol (SIP) Features

A User or Administrator can specify UPnP on specific lines using the 
configuration files (using the “upnp mapping lines” parameter) or the Aastra 
Web UI (at the path Basic Settings->Preferences->UPnP Mapping Lines).

For more information about enabling/disabling UPnP Mapping on specific lines, 
see Chapter 5, the section, 

Use the following procedures to configure UPnP on the IP phones.

For specific parameters you can set in the configuration files, see Appendix A, the section, 

on 

page A-37.

1

Press 

 on the phone to enter the Options List.

2

Select Administrator Menu.

3

Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.

4

Select Network Settings.

5

Select NAT Settings.

6

Select UPnP.

7

Press Change to select “Yes” or “No”. Default is “No”.
This field enables or disables the use of UPnP on the IP Phone.

Draft 1