Aastra Telecom 9480i Series User Manual

41-001160-03, Rev 00, Releaes 2.4 

5-93

Configuring Operational Features

For more information, see the section, 

 on 

Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to 
another destination. The phone sends the SIP message to the SIP proxy, which 
then forwards the call to the assigned destination.

An Administrator or User can configure CFWD on the phone-side by setting a 
mode for the phone to use (Account, Phone, or Custom). Once the mode is set, 
you can use the IP Phone UI to use the CFWD feature at Options->Call Forward 
or by pressing a configured Call Forward softkey/programmable key/extension 
module key.

The following describes the behavior for each CFWD mode.

•

Account mode - The account mode allows you to configure CFWD on a per 
account basis. Pressing a configured CFWD key applies to the account in 
focus.

•

Phone mode - The Phone mode allows you to set the same CFWD 
configuration for all accounts (All, Busy, and/or No Answer). When you 
configure the initial account, the phone applies the configuration to all other 
accounts. (In the Aastra Web UI, only the account you configured is enabled. 
All other accounts are grayed out but set to the same configuration.) Using the 
Aastra Web UI, if you make changes to that initial account, the changes apply 
to all accounts on the phone.

3

Configure a DND key on the phone using the procedures in the section, 

 on 

4

Click 

 to save your changes.

The change takes effect immediately without a reboot.

Draft 1