Aastra Telecom 6867i SIP User Manual

Page of 183
Making Calls
 
104
41-001524-00 REV00 – 04.2014
Using Intercom Functionality
On the 6867 you can use the Icom key to automatically connect with a remote extension.
Using the Icom Key
You can set specific incoming Intercom call features on the 6867i IP phone using the Aastra Web UI. The following table 
describes these features.
IP Phone UI
1.
Press the Icom key.
2.
Enter the extension number of the person you wish to intercom or the BLF key for that extension.
3.
After a beep tone, your phone automatically connects with the remote extension and you can speak through its 
speaker.
4.
To cancel intercom, press 
or the Cancel key.
5.
When you are finished speaking, hang up the phone by placing the handset back on-hook or by pressing 
 
or the line/call appearance button for the active call. When you hang up, the remote phone also hangs up.
Incoming Intercom Features in Aastra Web UI
Description
Microphone Mute
Allows you to enable or disable the microphone on the IP phone for Intercom calls made by the 
originating caller.
Auto Answer
Allows you to enable or disable the IP phone to automatically answer an Intercom call. If auto-
answer is enabled on the IP phone, the phone plays a tone (if Play Warning Tone is enabled) to 
alert the user before answering the intercom call. If auto-answer is disabled, the phone treats the 
incoming intercom call as a normal call.
Play Warning Tone
Allows you to enable or disable a warning tone to play when the phone receives an incoming 
intercom call on an active line.
Allow Barge In
Allows you to enable or disable how the phone handles incoming intercom calls while the phone 
is on an active call.
Note: 
For more information about the incoming Intercom features and for procedures on setting these features, se
 on 
.