Aastra Telecom 480I User Manual
Softkey/Programmable Key Parameters
A-94
41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix A
Softkey Settings for 480i and 480i CT
The value of "N" for the following parameters is dependent on the number of
softkeys available on the 480i/480i CT models. See the table above for applicable
values.
softkeys available on the 480i/480i CT models. See the table above for applicable
values.
Parameter –
softkeyN type
softkeyN type
Type
(in Web UI)
(in Web UI)
Aastra Web UI
Operation->Softkeys and XML
Configuration Files
aastra.cfg, <mac>.cfg
Description
The type of softkey to configure. Valid types are:
•
•
line - Indicates softkey is configured for line use.
•
speeddial - Indicates softkey is configured for speeddial use.
•
dnd - Indicates softkey is configured for do not disturb on the phone.
This option is "do not disturb" in the Aastra Web UI).
This option is "do not disturb" in the Aastra Web UI).
•
blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key.
User can dial out on a BLF configured key.
•
list - Indicates softkey is configured for BLF list use. (This option is
BLF\List in the Aastra Web UI). User can dial out on a BLF List
configured key.
BLF\List in the Aastra Web UI). User can dial out on a BLF List
configured key.
•
xml - Indicates the softkey is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
•
flash - Indicates the softkey is set to generate a flash event when it is
pressed on the 480i and 480i CT, or a feature key is pressed on the
480i CT handset.
pressed on the 480i and 480i CT, or a feature key is pressed on the
480i CT handset.
•
The IP phone generates flash events only when a call is connected
and there is an active RTP stream (for example, when the call is not
on hold).
and there is an active RTP stream (for example, when the call is not
on hold).
•
spre - Indicates the softkey is configured to automatically activate
specific services offered by the server. For example, if the spre value
of *82 is configured, then by pressing the softkey, *82 automatically
activates a service provided by the server.
specific services offered by the server. For example, if the spre value
of *82 is configured, then by pressing the softkey, *82 automatically
activates a service provided by the server.
•
park - Indicates the softkey is configured to park incoming calls when
pressed.
pressed.
•
pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
when pressed.
•
empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
•
lcr - Indicates the softkey is configured for “last call return” when
pressed.
pressed.
Format
Text