Aastra Telecom 480I User Manual
Administrator Level Options
41-001129-00 Rev 09, Release 1.4.1
3-21
Administrator Options
Administrator Options
Configuration Server Settings
The configuration server stores the firmware images, configuration files, and
software when performing software upgrades to the IP phone. An administrator
can configure the following parameters for the configuration server:
software when performing software upgrades to the IP phone. An administrator
can configure the following parameters for the configuration server:
•
Download Protocol
Protocol to use for downloading new versions of firmware and configuration
files to the IP phone. Valid values are TFTP, FTP, and HTTP. Default is TFTP.
Protocol to use for downloading new versions of firmware and configuration
files to the IP phone. Valid values are TFTP, FTP, and HTTP. Default is TFTP.
•
TFTP Server
IP address or qualified domain name of the TFTP server. You can select a
primary or alternate TFTP server and then assign an IP address or qualified
domain name to your selection. Set this option if TFTP is the download
protocol selected.
IP address or qualified domain name of the TFTP server. You can select a
primary or alternate TFTP server and then assign an IP address or qualified
domain name to your selection. Set this option if TFTP is the download
protocol selected.
•
FTP Server
IP address or network host name of the FTP server. If required, you can also
assign a user name and password for access to the FTP server. Set this option
if FTP is the download protocol selected. If you enter a network host name,
DNS must also be set.
IP address or network host name of the FTP server. If required, you can also
assign a user name and password for access to the FTP server. Set this option
if FTP is the download protocol selected. If you enter a network host name,
DNS must also be set.
•
HTTP Server
IP address of the HTTP server. You can also assign an HTTP path to the
HTTP server. Set this option if HTTP is the download protocol selected.
IP address of the HTTP server. You can also assign an HTTP path to the
HTTP server. Set this option if HTTP is the download protocol selected.
•
Mode
(not configurable via IP phone UI). Enables and disables the IP phone to be
updated automatically (auto-resync) once a day at a specific time in a 24-hour
period. Updating can be done to the configuration files only, the firmware
only, or both. This feature works with TFTP, FTP, and HTTP servers. The
auto update feature works with both encrypted and plain text configuration
files.
(not configurable via IP phone UI). Enables and disables the IP phone to be
updated automatically (auto-resync) once a day at a specific time in a 24-hour
period. Updating can be done to the configuration files only, the firmware
only, or both. This feature works with TFTP, FTP, and HTTP servers. The
auto update feature works with both encrypted and plain text configuration
files.
Note:
For DHCP to automatically populate the IP address or domain
name for the TFTP server, your DHCP server must support Option 66.
For more information, see Chapter 4, the section,
For more information, see Chapter 4, the section,
on
Note:
Any changes made using the Aastra Web UI or the IP phone UI are
not overwritten by an auto-resync update. Auto-resync affects the
configuration files only. However, the settings in the Aastra Web UI take
precedence over the IP phone UI and the configuration files.
configuration files only. However, the settings in the Aastra Web UI take
precedence over the IP phone UI and the configuration files.