Aastra Telecom 480I User Manual

Advanced Network Settings

4-28

41-001129-00 Rev 09, Release 1.4.1  

IP Phone Administrator Guide

Use the following procedures to configure VLAN on the IP phone.

VLAN is disabled by default. When you enable VLAN, the IP 

phones use the default settings for each VLAN parameter. You can 
change the default settings if required using the following procedure.

For specific parameters you can set in the configuration files, see Appendix A, the section, 

 on 

1

For 9112i/9133i:
Press 

I

on the phone to enter the Options List.

For 480i/480i CT:
Press 

% on the phone to enter the Options List.

2

Select Network.

Select VLAN.

To globally enable/disable VLAN and set priority for non-IP packets:

4

Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)

5

Press Done to save the changes.

6

Select Phone.

7

Select Priority.

8

Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.

9

Press Done to save the changes.

10

Press Done again to return to the VLAN Phone menu.

To set VLAN ID and priority for Port 0: