Aastra Telecom 9112I User Manual

12

9112i IP Phone User Guide

1. Click on Operation→ 

Programmable Keys and XML.

2. Pick a programmable key to 

configure for Parking a call.

3. In the "Type" field, select Park.
4. In the "Value" field, enter the 

approriate value based on the 

server in your network.

Note: For values to enter in this field, 

see the table 

5. Click 

 to save your 

changes.

6. Click on Operation→Reset.
7. In the "Restart Phone" field 

click 

 to restart the IP 

phone.

Use the following procedure on the 
IP phones to park a call and pick 
up a parked call.

1. While on a live call, press the 

"Park" softkey.

2. Perform the following for your 

specific server:

3. If the call is parked successfully, 

the response is either a greeting 

voice confirming that the call 

was parked, or a hang up 

occurs. The parked call party 

will get music on hold.

4. If the call fails, you can pick up 

the call (using the next 

procedure) and press the "Park" 

softkey again to retry step 2.

1. Pick up the handset on the 

phone.

2. Enter the extension number 

where the call was parked.

3. Press the "Pickup" softkey.  

If the call pick up is successful, 
you are connected with the 
parked call.

You can edit a programmable key 
from the IP phone UI or the Aastra 
Web UI.

• Save a new number to the key 

For Asterisk Server

Server announces the extension 
number where the call has been 
parked. Once the call is parked, 
press the Nkey to complete park-
ing.

For BroadWorks Server

After you hear the greeting from the 
CallPark server, enter the extension 
where you want to park the call.

For Sylnatro Server

Enter the extension number where 
you want to park the call, followed 
by "#" key.

For ININ Server

Enter the extension number where 
you want to park the call, followed 
by "#" key.