Aastra Telecom 57I User Manual
Operational, Basic, and Advanced Parameters
41-001160-00, Release 2.1, Rev 04
A-81
Configuration Parameters
Appendix A
Autodial Settings
Global Settings
Parameter –
sip lineN srtp mode
sip lineN srtp mode
Aastra Web UI
Advanced Settings->Line <1-9>->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Description
This parameter determines if SRTP is enabled on this line, as follows:
•
If set to -1, then use the global setting for this line. (This is the
default setting.)
default setting.)
•
If set to 0, then disable SRTP.
•
If set to 1 then SRTP calls are preferred.
•
If set to 2, then SRTP calls only are generated/accepted.
Format
Integer
Default Value
0 (disabled)
Range
-1
0
1
2
0
1
2
Example
sip line1 mode: 1
Parameter –
sip autodial number
sip autodial number
Autodial Number
(in Web UI)
(in Web UI)
Aastra Web UI
Advanced Settings>Global SIP>
Autodial Settings
Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Description
Globally specifies the SIP phone number that the IP phone autodials
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
Format
Integer
Default Value
Blank
Range
Any valid SIP number
Examples
sip autodial number: 8500