Aastra Telecom 2816-003 User Manual
Chapter 1, Introduction
4
Aastra – 2816-003
Phone Features
3-line LCD screen.
2 line appearance keys (L1 – L2) with corresponding status lamps.
Press-and-hold speeddial key configuration feature
8 top programmable hard keys with status lamps.
Supports up to 6 call lines.
Full-duplex speaker for hands-free calls.
Headset/headset modular connector.
Built-in-two-port, 10/100 Ethernet switch allowing you to share a connection with
your computer.
General Requirements
The 6731i requires the following environment:
A SIP-based IP PBX system or network installed and running with a SIP account
created for the 6731i.
Access to a Trivial File Transfer Protocol (TFTP) server.
Ethernet/Fast Ethernet LAN (10/100mb).
Category 5/5e straight through cabling.
Power Options:
– Power over Ethernet (PoE) 802.3af.
– Inline power injector – An optional accessory necessary only if your network
– Inline power injector – An optional accessory necessary only if your network
provides no inline power.
– AC power adapter, included with the phone.
Handset/Headset Connection
The 6731i supports a handset or headset using the same jack. Both a handset and a
headset cannot be connected at the same time.
headset cannot be connected at the same time.
Turn the phone over and locate the handset jack marked
. Insert one end of handset
or headset cord into the jack until it clicks into place. Then route the cord through the
groove as shown in the illustration below.
groove as shown in the illustration below.