Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

An Administrator has access to specific Basic Setting options to configure and manage the IP Phone in the network. The 
following sections identify the options available to an Administrator only, or where indicated, to a User and Administrator. 
These tables also identify whether you can configure them using the Aastra Web UI, IP Phone UI, or the configuration files.

Local Dial Plan

sip dial plan

A dial plan that describes the number and pattern of digits that a user dials to reach 
a particular telephone number. Dial Plan field accepts up to 512 characters.

For more information on this feature, see 

Send Dial Plan Terminator

sip dial plan terminator

Specifies whether or not pressing the hash/pound (i.e. "#") key, while performing an 
outgoing call on an open line, should be sent as %23 to the proxy in the dial string or 
if the key should be used as a dial plan terminator (i.e. dials out the call immediately). 

For more information on this feature, see 

 on 

.

Digit Timeout

sip digit timeout

Represents the time, in seconds, to configure the timeout between consecutive key 
presses.

For more information on this feature, see. 

.

Park Call

Note:
This option can be set by both 
Users and Administrators.

sip lineN park pickup config

The parking of a live call to a specific extension.

To configure the Park feature on a key, see Chapter 5, the section, 

.

Pick Up Parked Call

Note:
This option can be set by both 
Users and Administrators.

sip lineN park pickup config

Picking up a parked call at the specified extension. 

To configure the Pickup feature on a key, see Chapter 5, the section, 

 on 

N/A

suppress dtmf playback

Enables and disables suppression of DTMF playback when a number is dialed from 
the softkeys or programmable keys.

For more information on this feature, see. 

.

Display DTMF Digits

Note:
This option can be set by both 
Users and Administrators.

display dtmf digits

Enables and disables the display of DTMF digits on the IP phone display during a con-
nected state.

For more information on this feature, see. 

.

Play Call Waiting Tone

Note:
This option can be set by both 
Users and Administrators.

call waiting tone

Enable or disables the playing of a call waiting tone when a caller is on an active call 
and a new call comes into the phone. 

For more information on this feature, see. 

 on 

.

Stuttered Dial Tone

Note:
This option can be set by both 
Users and Administrators.

stutter disabled

Enable or disables the playing of a stuttered dial tone when there is a message wait-
ing on the IP phone.

For more information on this feature, see.