Aastra Telecom 41-001343-02 User Manual
Operational Features
41-001343-02 REV04 – 05.2014
5-59
Configuring Call Waiting Tone
Use the following procedures to configure the Call Waiting Tone feature on the IP phone.
Call Waiting Tone Period
A User or Administrator can specify a specific time period (in seconds) for the call waiting tone to play at regular intervals
on an active call using the parameter “call waiting tone period”. A value of “0” is the default and plays the call waiting
tone only once on the active call. When the incoming caller hangs up, the call waiting tone stops on the existing active call.
on an active call using the parameter “call waiting tone period”. A value of “0” is the default and plays the call waiting
tone only once on the active call. When the incoming caller hangs up, the call waiting tone stops on the existing active call.
You can enable or disable this feature in the configuration files or in the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Aastra Web UI
1.
Click on Basic Settings-> Preferences->General.
2.
The "Play Call Waiting Tone" field is enabled by default. To disable this field, uncheck the box. This feature allows you to enable or disable
the call waiting tone on the IP phone.
the call waiting tone on the IP phone.
Note:
The Call Waiting Tone feature works only if the “Call Waiting” tone field is enabled at the location Advanced Settings->Global SIP (or Line X)-
>Basic SIP Authentication Settings.
The Call Waiting Tone feature works only if the “Call Waiting” tone field is enabled at the location Advanced Settings->Global SIP (or Line X)-
>Basic SIP Authentication Settings.
3.
Click Save Settings to save your changes.