Aastra Telecom 41-001343-02 User Manual

Page of 876
Operational Features
 
5-138
41-001343-02 REV04 – 05.2014
Configuring Ring Splash Settings
Use the following parameters to configure the ring splashsettings:
BLF Subscription Period
On the IP phones, you can set the time period, in seconds, that the IP phone re-subscribes the BLF subscription service.
In the configuration files, enter the following parameter with a valid value to set the BLF subscription period:
sip blf subscription period: <value in seconds>
The minimum value for this parameter is 120 seconds (2 minutes) and the maximum is 2147483647 seconds. The default 
is 3600 (1 hour). The phone resubscribes to the BLF subscription service before the defined subscription period ends.
You can configure this feature using the configuration files or the Aastra Web UI.
Configuring BLF Subscription Period
Use the following procedures to configure the BLF subscription period on the IP phone.
Configuration Files
To set the ring splash on a per key basis in the configuration files for BLF, see Appendix A, the sections 
on
Note:
The “sip blf subscription period” parameter is not applicable to BLF/List subscriptions.
Configuration Files
To configure the BLF subscription period on the IP phones using the configuration files, see
 
Appendix A, the section,