Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

In addition to configuring the phone with TR-069, you can also do the following:

Reboot the phone

Reset to factory defaults

Update the firmware of the device

Backup/restore configuration

Upload the log file

For more information about TR-069, see the Aastra TR-069 Configuration Guide.

The IP phones can send the MAC address and line number in the REGISTER packets making it easier for the call server 
when a user configures the phones via the Aastra Web UI or the IP Phone UI.  The following two configurable headers send 
this information to the call server:

Aastra-Mac: <mac address>

Aastra-Line: <line number>

The MAC address is sent in uppercase hex numbers, for example, 00085D03C792.  The line number is a number between 1 
and 9.

The following parameters allow you to enable/disable the sending of MAC address and line number to the call server:

These parameters are disabled by default. The parameters are configurable via the configuration files or the Aastra Web UI.

For specific parameters you can set in the configuration files for enabling/disabling MAC address and line number, see Appendix A, the section,