Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

The following is an example of configuring the mode for DND in the configuration files:

dnd key mode: 2

softkey1 type: dnd

softkey1 states: idle connected incoming outgoing busy

In the above example, softkey 1 is configured for DND for line 1 only, with a “custom” configuration. Pressing softkey 1 
displays DND screens for which you can customize on the phone.

Parameter – 
dnd key mode

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Sets the mode for how the phone uses “do not disturb” (DND):

account Sets DND for a specific account. 
DND key toggles the account in focus on the IP Phone UI, to ON or OFF.

phone Sets DND ON for all accounts on the phone.
DND key toggles all accounts on the phone to ON or OFF.

custom Sets the phone to display custom screens after pressing the DND key, that list 
the account(s) on the phone. The user can select a specific account for DND, turn DND 
ON for all accounts, or turn DND OFF for all accounts.

Notes:
• If there is only one account configured on the phone, then the mode setting is ignored 

and the phone behaves as if the mode was set to “Phone”.

• You must configure a DND key on the phone to use this feature. To configure a DND key, 

see 

 on 

.

Integer

1 (phone)

0 (account)
1 (phone)
2 (custom)

dnd key mode: 2

Parameter – 
priority alerting enabled

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Enables and disables distinctive ringing on the IP phone for incoming calls and call-wait-
ing calls.

Boolean

1 (true)

0 (false)
1 (true)

priority alerting enabled: 0